PRODUCTS - Surgical Glove
Maxitex Duplex PowderFree
   
  The Unique Dual Surgical Glove Set for Trauma & Orthopaedic Surgery
   
 
MAXITEX Duplex is made for the Traumatology and Orthopaedic surgeries in higher risk exposures that require a double shield protection. The glove is custom designed as a dual set and is packed together in one convenient pouch.
   
 
Double Protection in One Single Convenient Pack
Maxitex Duplex comes in two parts, the Primary Gloves and the Secondary Gloves. The Primary Gloves are coloured in bright yellow and are worn first.
The Secondary Gloves which are tan in color are then worn over the Primary Gloves. The two gloves worn together give the sensation of wearing a single glove, unlike the usual double gloving that induces cramps in the ngers after some time.

Absolute Fit and Comfort
The absolute fit is achieved by having optimum glove dimensions which allow a snug fit between the two gloves without any inter-glove slippage.
The conformance to the user’s hands means total comfort, even over long hours of use.

Unparalleled Benefit
A dual set in one convenient pouch translates to savings in terms of cost, storage, handling and administration, not to mention being environmentally friendly by using less packaging
   
 
Solid reasons to swi tch to MAXITEX Duplex PF
INCREASED SAFETY
  + 100% electronically leak tested
+ Precision fitted gloves reduce risk of
IMPROVED COMFORT
  + Anatomically designed to significantly reduce hand fatigue
+ Minimum pressure with good fit
NO SLIPPAGE OF CUFF
  + dierent design of the primary and secondary glove provides higher grip
   onto surgical gowns
SENSITIVITY
  + Special formulation for primary gloves to allow high stretch capability
+ Softer formulation for secondary
SENSITIVITY
  + Maxitex Duplex saves costs of 30% to 50% over double gloving of
   identical gloves
   
   
 
Technical Specification (EN)
Specification EN Recommendation MAXITEX Duplex
Powder free
Force at break >12N Typically 14N
Powder Content Unspecified < 2.0 mg/glove
Water Soluble Protein Residue Unspecified < 50 µg/dm2
Length Min 250 mm to 280 mm
(size dependent)
Min 295 mm
Thickness at palm Unspecified 0.23 mm ± 0.02 mm
   
 
Technical Specification (ASTM)
Specification ASTM D 3577-01
Recommendation
MAXITEX Duplex
Powder free
Tensile Strength Before : 24 MPa min
After : 18 MPa min
Before : 26 MPa min
After : 20 MPa min
Ultimate Elongation Before : 750% min
After : 560% min
Before : 800% min
After : 700% min
Water Soluble Protein Residue < 200 µg/dm2 30 µg/g
Powder Content PP < 1.5 mg/dm2 NA
Powder Content PF < 2.0 mg/glove < 1.5 mg/glove
   
 
Ordering Information
Size Reorder# PF Packing info
6 85-384-2
4 dispenser boxes of 25 pairs each per shipping carton
6.5 85-384-3
7 85-384-4
7.5 85-384-5
8 85-384-6
8.5 85-384-7
9 85-384-8
   
   
  MAXITEX Duplex complies with the following standards:
 
ASTM D 3577
United States of America
EN 455 Part 1, 2 and 3 European Community
ISO 10282 International Organization of Standardization
AS / NZS 4179 Australia / New Zealand
AAMI 1984 Association of American Medical Industry
ISO 11137 International Organization of Standardization
   
  click here to view product brochure
 
Page 1 Page 2